Bitte benutzen Sie diese Referenz, um auf diese Ressource zu verweisen: doi:10.22028/D291-24279
Titel: Sol-gel coating of thin display glasses : problems and remedy
VerfasserIn: Pütz, Jörg
Aegerter, Michel A.
Guzman, G.
Sprache: Englisch
Erscheinungsjahr: 2004
Quelle: Journal of sol-gel science and technology. - 32. 2004, 1/3, S. 125-129
Kontrollierte Schlagwörter: Tauchbeschichten
Dünne Schicht
Antimon
Hydrolyse
Verdunstung
DDC-Sachgruppe: 620 Ingenieurwissenschaften und Maschinenbau
Dokumenttyp: Journalartikel / Zeitschriftenartikel
Abstract: Evaporation cooling is an inevitable blut often neglected concomitant effect of sol-gel dip coating and related techniques, which is responsible for occasional coating problems. The phenomenon, however, emerges mostly for thin substrates of less than i mm thickness as the heat capacity of the substrate - the main source of heat for the evaporation - is reduced. The cooling of the substrate results in a reduced evaporation rate and an increased humidity in the surroundings of the film, leading to demixing of liquid components and an uncontrolled hydrolysis. The resulting coatings exhibit a hazy and cloudy appearance with crater-like structures in the micron range and consequently, functional properties such as the electrical conductivity of ATO coatings (antimony-doped tin oxide, SnO2:Sb) are unsatisfactory. Among a variety of measures to overcome this cooling problem, a moderate heating of the coating liquid to only 25°C was found to be the method of choice to obtain high quality sol-gel thin films on substrates with a thickness down to 0.4 mm as required for display applications. This slight modification of the dip coating processing helps to reduce the susceptibility of the wet film to humidity and to improve the coating quality and the reproducibility in general - both on thin and thick substrates.
Link zu diesem Datensatz: urn:nbn:de:bsz:291-scidok-25244
hdl:20.500.11880/24335
http://dx.doi.org/10.22028/D291-24279
Datum des Eintrags: 17-Dez-2009
Fakultät: SE - Sonstige Einrichtungen
Fachrichtung: SE - INM Leibniz-Institut für Neue Materialien
Sammlung:INM
SciDok - Der Wissenschaftsserver der Universität des Saarlandes

Dateien zu diesem Datensatz:
Datei Beschreibung GrößeFormat 
aeg200414.pdf924,32 kBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.